2016 Land Pride RCR1860

Call for Price



In Stock
GP Rents Ada
Primary Color
Trim Color
GP Rents
Stock #
GP Rents
Land Pride


Dealer Insights

Land Pride RCR1860 5' Rotary Cutter
$50 Per Day
$150 Per Week
$450 Per Month
Rental Terms & Conditions
All rates are subject to change without notice and subject to applicable tax. Rental rates are F.O.B. our yard. Lessee is responsible for proper maintenance and insurance of equipment while in their possession. Fuel recovery charge extra. Cleaning charges may apply. Equipment listed is subject to availability per location. We don’t charge damage waiver, and we don’t rent trailers without machines.
• 8 Hours A Day / 24 Hours Out
• 40 Hours / 7-Day Week
• 160 Hours / 4-Week Month


The RCR18 Series Rotary Cutters are for light-duty maintenance around the farm, on gentle slopes, or slightly contoured right-of-ways. A fully welded deck adds additional strength while the floating 3-point permits the deck to hug the terrain for a quality cut. The cutters have a category I three-point hitch and are Quick Hitch adaptable. They are offered with a standard ASAE Category 3 driveline with either shear bolt or slip-clutch protection and either a laminated or solid rubber tailwheel.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Cat. 3 driveline with shear-bolt: Shear-bolt offers maximum driveline protection.
  • Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
  • Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy gauge deck construction: 10 gauge
  • Box tubing deck support: Makes for a stronger rigid deck
  • Fully welded deck: Robotic welded. Adds additional strength.
  • Extended cutter front: For increased material flow and added protection.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • Deck Height: 7 1/4” Deck height on 60” and 8 7/8” deck height on 72” model Allows cutter to handle heavy cutting conditions.
  • 1 1/2” to 13” RCR1860 Cutting height 1 1/2" to 11 1/2" RCR1872 Cutting height: Provides for a wide range of cutting conditions.
  • Full length skid shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
  • 1/2” x 3” Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 10 Gauge stump jumper: Standard round stump jumper slides over stumps, rocks and debris.
  • High blade tip speed RCR1860 = 16,360 FPM RCR1872 = 14,853 FPM: Ensures clean cut.
  • 15”Laminated tailwheel: Laminated material is long lasting in rough conditions.
  • 4” x 16” Solid rubber tailwheel: Can’t go flat.
  • Heavy-duty spindle on tailwheel: Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly.
  • Guarding: Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
  • Machine Weight: 599 lb. with laminated tailwheel, slip clutch driveline, Front Rubber Guards and Rear Metal Band
  • Hitch: Category I with Floating Clevis Top Link, Quick Hitch Ready
  • Cutting Width: 60 in.
  • Overall Width: 65 in.
  • Overall Length: 99 3/8 in.
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe): 7 1/2 in.
  • Cutting Height: 1 1/2 in. - 13 in.
  • Cutting Capacity: 2 in. Diameter
  • Recommended Tractor PTO HP: 20-65 hp
  • PTO Speed: 540 rpm
  • Gearbox: 1:1.93 Speed-Up Beveled Gears Cast Iron Housing
  • Gearbox Oil Capacity & Lubricant: 4.5 Pints of EP 80-90W oil
  • Deck Material Thickness: 10 Ga. (.134 in.)
  • Side Skirt Material Thickness: 10 Ga. (.134 in.)
  • Deck Construction: All Welded Deck
  • Skid Construction: Full length welded on
  • Stump Jumper: Round Pan 10 ga. x 24 in. with Blade Holder Bar
  • Blades (2): 1/2 in. x 3 in. Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction
  • Blade Bolts: Keyed with harden flat washers & lock nuts.
  • Blade Tip Speed: 16,363 fpm
  • Driveline: ASAE Category 3 Shear Bolt or 2-plate Slip Clutch
  • Driveline Protection: Optional - Center Shearbolt protection, Optional - Center Bolt 2 plate Slip Clutch
  • Tailwheel Mount Assembly: Welded A-arm and Caster Fork with 360 deg. swivel
  • Tailwheel: 4 in. x 8 in. x 15 in. Laminated Tire with cast iron hub or 4 in. x 16 in. Molded Rubber Tire
  • Front Guard: Optional: Rubber Belting; Accessory: Chain Guard
  • Rear Guard: Standard: Metal Band; Optional: Rubber Belting; Accessory: Chain Guard



Working Width
60 in.
65 in.
99 3/8 in.
599 lb.
Recommended HP
20-65 hp