2016 Kubota M62 TLB

Call for Price



In Stock
GP Rents Ada
Primary Color
Kubota Orange
Trim Color
GP Rents
Stock #
GP Rents
Engine Make


Dealer Insights

M62 (Tractor/Loader/Backhoe) 62 HP / 8925 Weight / 14'2" Digging Depth
$250 Per Day
$750 Per Week
$2250 Per Month
Rental Terms & Conditions
All rates are subject to change without notice and subject to applicable tax. Rental rates are F.O.B. our yard. Lessee is responsible for proper maintenance and insurance of equipment while in their possession. Fuel recovery charge extra. Cleaning charges may apply. Equipment listed is subject to availability per location. We don’t charge damage waiver, and we don’t rent trailers without machines.
• 8 Hours A Day / 24 Hours Out
• 40 Hours / 7-Day Week
• 160 Hours / 4-Week Month


Kubota's largest TLB was engineered to save you time and effort on every job. Packed full of upgraded features, the M62 comes equipped with a 63 HP Kubota Tier 4 Final diesel engine, Kubota front loader with 3,960 lbs. of lift capacity and powerful Kubota backhoe with 169.8 in. max digging depth. It's one powerful combination ideal for a wide range of landscaping, construction and contracting jobs.

  • New Kubota Engines: Powerful yet clean, Kubota’s new engines feature a Common Rail direct-injection system that reduces emissions and increases fuel economy while maintaining high levels of power and torque. These reliable engines also boast a Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation system (EGR). Put it all together and you get greater fuel savings as well as compliance with Tier IV Final emissions regulations.
  • HST Plus Transmission: Tackle any task with ease and efficiency. With extraordinary precision, HST Plus's automated control of both the HST pump and drive motor gives you optimal performance, regardless of the task, working conditions, or operator expertise. Auto Throttle Advance; Hydro Dual Speed (H-DS); HST Response Control; Stall Guard Plus and Auto H-DS
  • Feather-Step Operation (Hydraulic Servo System): Our HST also comes with a smoother, more responsive pedal, thanks to Kubota's traditional hydraulic servo system, which decreases the amount of pressure required to depress the pedal.
  • Four-Wheel Drive: The M62's four-wheel drive gives you the power and stability you need, especially when pulling heavy loads or working on uneven terrain. The front wheel drive bevel gear assures that you always get a smooth and full power transfer.
  • IntelliPanel™: The large, easy to read LCD panel provides all of the vital information you need to keep your TLB in peak working condition for maximum productivity. Indicators, displays, and sensor messages include current working status, engine conditions, fuel and oil warning signals, and a variety of maintenance indicators, so you’ll always know how the tractor is functioning and when you need to refuel or perform maintenance.
  • Slanted Nose Hood: The M62's distinctive slant nose hood design isn't just for looks. This unique styling offers you a greater field of view, allowing you to see more of what's in front of you.
  • Integrated Main Frame: The M62's integral main frame absorbs twisting loads during backhoe and loader opeation and will not transmit flex to the tractor chassis. This ensures the tractor's structural integrity.
  • Heavy-Duty Rear Axle: The heavy-duty rear axle uses multiple wet-disc brakes for extended life and smooth stopping performance.
  • Independent PTO: Get even more work done by attaching a wide range of PTO-driven implements, including rotary tillers, post hole diggers, snow blowers and rear-mounted mowers. The 540 RPM PTO is hydraulic-independent, letting you engage and disengage the PTO without stopping the tractor.
  • Category I and II 3-Point Hitch (optional): Do even more by attaching any of a wide array of rear-mounted implements to the Category I and II 3-point hitch. Attachment is quick and easy, and the hitch provides astonishing lift capacity. (L47 is Category I only.)
  • Large Fuel Tank: A large, 17.7 gal. (67 liter) fuel tank lets you get more work done between fueling stops. Less down-time for refueling means greater productivity and efficiency, particularly on those big tractor jobs.
  • ROPS/FOPS (Meets OSHA1926 1001/1003 & ISO3471): The 4-post Rollover Protective Structure and the Falling Objective Protective Structure come standard on the M62. To help keep you safe from any potential risks, a steel roof lies underneath the stylish orange canopy.
  • Remote Hydraulic Control Valves: The M62 offers three optional Remote Hydraulic Control Valves for a greater selection of hydraulically powered implements. For operators, this versatile system translates into a convenient and cost-efficient solution.
  • Engine Non-road emission std.: EPA Final Tier 4
  • Gross power (SAE): 63.0 hp (47.0 kW)
  • Net power (SAE): 59.1 hp (44.1 kW)
  • Total displacement: 148.5 cu.in. (2434 cm3)
  • No. of cylinders: 4
  • Rated speeds: 2700 rpm
  • Air cleaner: Dual element
  • Max. PTO power: 46.0 hp (34.3 kW)
  • Fuel tank capacity: 17.7 gal. (67 L)
  • Tire size Front: 10 x 16.5-R4
  • Tire size Rear: 17.5L-24 R4
  • Wheelbase: 80.7 in. (2050 mm)
  • Tread Front: 56.7 in. (1440 mm)
  • Tread Rear: 57.6 in. (1462 mm)
  • Weight with loader, backhoe and ROPS/FOPS: 8925 lb. (4048 kg)
  • Min. turning radius: 10.8 ft. (3.3 m)
  • Rear PTO: Independent, 540 rpm
  • Power steering: Hydrostatic
  • Transmission Type: HST Plus (6 range)
  • No. of speeds: Infinite
  • Max. traveling speed: 155 mph (24.9 km/h)
  • Range shift lever position: Seat side, right
  • Brake type: Wet disc
  • Pump capacity: 30.9 GPM (116.9 L/min.)
  • 3-point hitch lift capacity at 24 in. (610 mm) behind lift point: 2796 lb. (1350 kgf)
  • Position control: Standard
  • 3-point hitch (Category I & II): Optional
  • ROPS/FOPS (meets OSHA1926 1001/1003 , ISO3471 ): 4 post, Standard
  • Hard nose slanted hood: Standard
  • Back-up alarm: Standard
  • Hom: Standard
  • Rear axle differential lock: Standard
  • Loader-integrated reinforced frame: Standard
  • Reversible seat: Standard
  • Tilt steering: Standard
  • Dock: Walk-through deck
  • Glow plug: Super glow
TL1300 Loader Specifications
  • Lift capacity to max. height at pivot pin: 3960 lb. (1796 kg)
  • Breakout force at pivot pin: 5992 lb. (26654 N)
  • Control valve: One detent float position power beyond circuit hydraulic dual self-leveling valve
  • Net weight (Approx.): 1169 lb. (530 kg)
  • Auto-leveling mechanism: Standard, Hydraulic
  • 2 lever quick coupler: Standard
  • Maximum lift height to pivot pin: 126.1 in. (3203 mm)
  • Clearance with bucket dumped: 95.0 in. (2412 mm)
  • Reach at maximum height: 24.1 in. (612 mm)
  • Maximum dump angle: 43 deg.
  • Reach with bucket on ground: 71.7 in. (1821 mm)
  • Bucket rollback angle: 45 deg.
  • Digging depth: 2.7 in. (69 mm)
  • Overall height in carrying position: 63.0 in. (1600 mm)
  • Perfomance Ratings (No load Self-leveling, Max 2900 rpm) - Raise to full height: Self-leveling On: 4.2 sec.; Self-leveling Off: 3.9 sec.
  • Perfomance Ratings (No load Self-leveling, Max 2900 rpm) - Lowering time: Self-leveling On: 4.3 sec.; Self-leveling Off: 3.1 sec.
  • Perfomance Ratings (No load Self-leveling, Max 2900 rpm) - Attachment rollback time: Self-leveling On: 2.4sec.; Self-leveling Off: 2.4 sec.
  • Perfomance Ratings (No load Self-leveling, Max 2900 rpm) - Attachment dumping time: Self-leveling On: 2.4 sec.; Self-leveling Off: 2.4 sec.
  • Boom stopper (meets OSHA1926.600): Standard
  • 3rd function valves: Optional 16.0 GPM
BT1000B Backhoe Specifications
  • Digging force using bucket cylinder (approx.): 6572 lb. (29234 N)
  • Digging force using dipperstick cylinder (approx.): 4657 lb. (20715 N)
  • Trunnion type boom swing mechanism two cylinders net weight (approx.): 2160 lb. (980 kg)
  • Transport height: 136.0 in. (3445 mm)
  • Stabilizer spread-transport: 67.2 in. (1707 mm)
  • Ground clearance: 13.8 in. ( 352 mm)
  • Overall width: 75.0 in. ( 1905 mm)
  • Digging depth, maximum: 169.8 in. (4312 mm)
  • Digging depth. 2 ft. flat bottom: 168.4 in. (4277 mm)
  • Digging depth, 8 ft. flat bottom: 154.7 in. (3929 mm)
  • Operating height, fully raised: 202.9 in. (5153 mm)
  • Loading height: 130.9 in. (3325 mm)
  • Loading reach: 62.0 in. (2083 mm)
  • Reach from swing pivot: 211.1 in. (5361 mm)
  • Swing pivot to rear axle center line: 39.7 in. (1008 mm)
  • Bucket rotation: 180 deg.
  • Swing arc: 180 deg.
  • Stabilizer spread-operating: 69.3 in. (2268 mm)
  • Angle of departure per SAE J1234: 20.4 deg.
  • Leveling angle: 10.0 deg. .
  • Auxiliary hydraulic valve: Optional 16.0 GPM



Engine Type
EPA Final Tier 4, 148.5 cu.in. (2434 cm³)
Gross: 63.0 hp (47.0 kW); Net: 59.1 hp (44.1 kW)
Rated RPM
2700 rpm
Fuel Capacity
17.7 gal. (67 L)


Bucket Capacity
3960 lb. (1796 kg)
Max Ground Speed
15.5 mph (24.9 km/h)
Tire Size
Front: 10 x 16.5-R4; Rear: 17.5L-24 R4
75.0 in. (1905 mm)
136.0 in. (3445 mm)
8925 lb. (4048 kg)
80.7 in. (2050 mm)